Limestone for Ripon, York and Harrogate

2-6mm Clean

Use:

Decorative chippings for gardens and paths. Bedding layer for permeable paving. Also an ideal decorative aggregate for topping off pots and planters.

4-10mm Clean

Use:

Chippings for footpaths, flat roofs and pipe bedding. Produced to BSEN1260 / BSEN13242

10-20mm Clean

Use:

Chippings for footpaths, driveways and pipe bedding. Does not roll around like rounded gravel. Produced to BSEN1260 / BSEN13242

5-20mm Clean

Use:

Concrete mixes, pipe bedding and drainage

20-40mm Clean

Use:

Drainage stone, pipe bedding and filter media

40-75mm Clean

Use:

Drainage stone, general bulk fill and hard standings

80-200mm Clean (Gabion)

Use:

Stabilisation and control of earthworks and river works when used in Gabion baskets.

40mm Crusher Run

Use:

Capping sub formation prior to laying MOT type 1 sub-base. Farm roads and fill material under concrete. Not made to a specification so dust content will vary.

Mot Type 1 Sub-Base

Use:

Sub-base to full Ministry of Transport Specification for Highway Works. Can be left exposed or covered with asphalt or concrete

Type 1x

Use:

Free draining sub-base with low -5mm content. Used under permeable paving such as Marshalls Priora and Hanson Aquaflow.

5mm to Dust

Use:

For bedding and backfilling around cables. Also used for agricultural lime.

6F5 Capping Layer

Use:

Capping sub formation prior to laying MOT type 1 sub-base. Available from quarried or recycled aggregates

Type 3

Use:

Low fines sub-base with less -63micron content than MOT Type 1, used for permeable paving applications such as Marshalls Priora and Hanson Aquaflow.

Self-Binding Pathmix

Use:

0-10mm self-binding path mix is used to make a decorative path or yard. It compacts to form a solid and decorative base for both domestic and commercial properties.

We deliver our aggregates to the following towns and their surrounding areas including Bedale, Boroughbridge, Bramhope, Catterick, Chapel Allerton, Darlington, Harewood, Harrogate, Helmsley, Knaresborough, Leeds, Leeming, Leyburn, Malton, Masham, Northallerton, Otley, Pateley Bridge, Pickering, Richmond, Ripon, Scarborough, Stokesley, Tadcaster, Thirsk, Wetherby and York

How Much Aggregates Do I Need?

By using the calculator below you can find out how much aggregates you need.

Enter values for the length, width and depth in the labelled fields.

Then click on the “CALCULATE” button.

First choose which product you are going to use:
Now choose the length of the area that you would like to fill:
Now choose the width of the area:
Now choose the depth that you would like to fill that area to:

Callback Request

Tell us how much you need for your job and we will get in touch.

If you’re looking for aggregates in North Yorkshire, you’re in the right place. As a family owned business, our philosophy is based on putting the customer at the heart of everything we do, whilst ensuring a sustainable future.

Limestone Aggregates

2-6mm Clean

Use:

4-10mm Clean

Use:

10-20mm Clean

Use:

5-20mm Clean

Use:

20-40mm Clean

Use:

40-75mm Clean

Use:

80-200mm Clean (Gabion)

Use:

40mm Crusher Run

Use:

Mot Type 1 Sub-Base

Use:

Type 1x

Use:

5mm to Dust

Use:

6F5 Capping Layer

Use:

Type 3

Use:

Self-Binding Pathmix

Use:

How Much Aggregates Do I Need?

Callback Request

Contact

Lightwater Quarries Ltd

Our Products

What Sets Us Apart

Help & Advice

Areas We Cover